Denon's DN-X500 is a 4U rackmountable mobile/club DJ analog matrix mixer with rock-solid construction and superb audio fidelity. The DN-X500's 8 line and 2 phono inputs are assignable to any of 4 channels. This 8-channel input matrix routing gives you the freedom to move any source to any channel or even the same source to multiple channels for remixing. The DN-X500 features 4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with contour adjustment. Independent pre-fader level meters allow you to optimize and match levels for each source so you can be sure the transition crossfading between sources is smooth. The DN-X500 also features 3-band EQ with full output kill booth output with channel select 2 mic inputs with talkover sensitivity and effects send/return with cue dry/wet knob and channel select. Plus with the optional ACD-46 rotary fader kit you can easily swap out any channel fader. Denon DN-X500 Pro DJ Mixer Features: * Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels * 8 line/2 phono switchable * 4 smooth 60mm VCA channel faders * Responsive 45mm VCA crossfader with contour adjust * Independent channel PFL meters: all input levels can be adjusted in advance to match the gain levels insuring a smooth transition between fades * Independent 3-band EQ kill (High-Mid-Low) * Independent EQ on/off switch * Booth output assign selector: pre-monitor any channel including Master through the booth * output as you would with your headphones with volume control * External send/return control: multichannel assignable effect on/off effect cueing (pre & post) effect dry/wet knob * Independent channel A-B post switch (crossfader) * Powerful clean headphone output * Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with * all Denon DJ CD/MP3 players * Compact 4U rackspace with recessed rear terminals * Independent 3-band main and aux mic EQ * Independent CUE system (all channels) * Mic talkover function with sensitivity adjustment * Split/cue headphone monitor with PFL metering * Master output -10dB attenuation switch * Master output stereo/mono switch * Record out - RCA/unbalanced * Subwoofer/lighting output with freq. adjust: ideal for powered speakers powered amp or even a signal feed for lighting systems # Dimensions: 19W x 4-2/5H x 6-9/10D (482 x 112.5 x 177mm) # Weight: 5.8kg 13 lbs. # Power supply: AC120 V +/- 10% 60 Hz # Power consumption: 27W Audio Section Input Level and Impedance: # 8-Line-14dBV (200 mV) 50kOhms # 2-Phono -50dBV (3.0mV) 50kOhms # Effect (Return) -14dBV (200mV) 50kOhm # Main Mic -54dBV (2.0mV) 10kOhms # Aux Mic -60dBV (1.0mV) 10kOhms Output Level and Impedance: # Balanced 4dBm (1.23V) 600 ohms # Unbalanced 0dBV (1.0V) 1k ohm # Booth (Balanced) 4dBm (1.23V) 600-ohm load # Rec (RCA) -10dBV (316mV) 1k Ohm # Effect (Send) -14dBV (200mV) 1k Ohm # Subwoofer/Lighting 2dBm (975mV) 600 ohms # Headphone 0dBV (1.0V) 32 ohms Frequency Response: # Line 20 to 20kHz +/- 2dB # Phono 20 to 20kHz RIAA +/- 2dB # Mic 20 to 20kHz +/- 2dB Signal to Noise Ratio: # Line 82dB (0dBm 1kHz EQ flat) # Phono 75dB (0dBm 1kHz EQ flat) # Main Mic 65dB (0dBm 1kHz EQ flat) Total Harmonic Distortion Rate # Line Below 0.05% # Phono Below 0.05% # Crosstalk Over 70dB Channel Equalizer # Hi +10dB -35dB (16kHz) # Mid +10dB -35dB (1kHz) # Low +6dB -35dB (60Hz) Microphone Equalizer # Hi +12dB -12dB (10kHz) # Mid +12dB -12dB (1kHz) # Low +12dB -12dB (100Hz)