CSL remote control for controlling more Cat5 Pods
RF Control and DMX capability
Electric Parameter
1. Input: DC12V/24V
2. The max load current: 10A
3. The max output power: 120W(DC12V)/240W(DC24V)
Wire port
1. Power supply port
2. DMX Signal input port
3. DMX Signal output port
4. RGB Signal output port
Function of remote controller
1. A key: enter next mode-setting menu
2. B key: increase mode
3. C key: reduce mode
4. D key: save setting, return the last menu.
Remarks: the controller can save the setting automatically.
Function details:
1. H-1: Red, light output can be adjustable from 1-256 grade.
2. H-2: Green, light output can be adjustable from 1-256 grade.
3. H-3: Blue, light output can be adjustable from 1-256 grade.
4. H-4: Yellow. light output can be adjustable from 1-256 grade.
5. H-5:Cyan, light output can be adjustable from 1-256 grade.
6. H-6:Purple, light output can be adjustable from 1-256 grade.
7. H-7: White, light output can be adjustable from 1-256 grade.
8. H-8: seven colors jumping changing, the speed can be changed from 1-20grade.
9. H-9: three colors jumping changing: the speed can be changed from 1-20grade.
10. H-A: seven colors gradual changing, the speed can be changed from 1-20grade.
11. H-B: three colors gradual changing, the speed can be changed from 1-20grade.
12. H-C: seven colors flash changing, the speed can be changed from 1-20grade.
13. H-D: three colors flash changing, the speed can be changed from 1-20grade.
14. Add: work together mode. We can change the DMX Address, from 001-512.
Remarks: Mode 1-8: Static color output
Mode 9-13: dynamic color output
How to use it :
Work individual
1 Press “B” to increase mode from “H-1 to H-D” , press “C” to decrease mode from” H-1 to H-D”.
2 For the mode “H-1 to H-7”, it’s static color. You can adjust the brightness, press “A” enter the second menu, then press “B&C”to change the brightness, the address can be changed from 1 to 255. then, when you adjust the brightness you want, press “D” to save the setting and return the last menu.
3 For the mode “H-8 to H-D”, it’s dynamic color, you can adjust the color changing speed, press”A” enter the second menu, then press”B&C” to change the speed, the address can be changed from -1 to -20, then, when you adjust the speed you want, press “D” to save the setting and return the last menu.
Work synchronously
step 1: connect them all by male and female connector
step 2: press “B or C”, set the all the wall washers’ window appear ”Add” mode. The 14th mode is “ADD”mode.
Step 3: Choose any one set wall washer as the mainframe, set the address from H-1 to H-D, total 13 mode are all ok, then you just control this mainframe to control all the other wall washers.
Remarks: If you want to change the mainframe, just need to change the address. Same as step 2 and step 3.
If you want to adjust the brightness and speed, same as working individually.
Remark: it has DMX input and output signal wire, if you want to connect other DMX Console products or connect the computer, it also can do.