CROWN XLS1000 Drive Core Series Power Amplifier

# Features: Power Amp with Integrated DriveCore Technology
# Advanced Switched-Mode Power Supply
# PureBand Crossover System
# XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
# Integrated PureBand Crossover System for better performance and control
# Peakx Limiters provide maximum output while protecting your speakers
# XLR, 1/4", RCA inputs provide outstanding flexibility
# 1/4" Inputs can be used as loop-thrus to distribute signal to additional amplifiers
# Efficient forced-air fans prevent excessive thermal buildup
# Electronically balanced XLR inputs; touchproof binding post and Speakon outputs
# Precision detented level controls, power switch, power LED
# six LEDs indicate signal, clip and fault for each channel

Specifications:
# Minimum Guaranteed Power per channel, both channels driven: 550W, Stereo, 2 Ohms (per ch.); 350W, Stereo, 4 Ohms (per ch.); 215W, Stereo, 8 Ohms (per ch.); 700W, Bridge-Mono, 8 Ohms;
# 1100W, Bridge-Mono, 4 Ohms;
# Sensitivity (for full rated power at 4 Ohms): 1.4 Vrms
# Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, -1 dB
# Signal-to-Noise Ratio Rated as dBr to full rated 8Ohm power output (A-Weighted): XLS1000 > 97dB
# Damping Factor (8 Ohm): 10Hz to 400Hz: > 200
# Crosstalk (below rated 8Ohm power): At 1kHz: > 85dB; At 20kHz: >55dB
# Input Impedance (nominal): 20 kOhm balanced, 10 kOhm unbalanced
# Load Impedance: 2 to 8 Ohm per channel in Stereo; 4 to 8 Ohm in Bridge Mono
# AC Line Voltage and Frequency Configurations Available (± 10%):120 VAC 60 Hz; 100 VAC 50/60 Hz; 220 and 240 VAC 50 Hz
# Ventilation: Flow-through ventilation from front to back
# Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
# Air Volume Requirements (per minute per unit): 80.15 ft (2.27 m )
# Integrated Processing: PureBand Crossover System; Crossover Filter: Linkwitz-Riley 24dB per Octave; Crossover Frequency Range: 50 HZ - 3 kHz: Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF); Peakx limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers

XLS 1000/1500: 7.7-inch (19.6-cm) depth.
XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)