Electro Voice

EV EVID C8.2 100w

Larger picture

EVID Series 8" Two Way Ceiling Speaker System

Never before has a ceiling speaker system delivered such a full range punch. Its specially tuned enclosure and 8" woofer provide amazing bass response. The 1" waveguide coupled tweeter give smooth controlled coverage out to 18 kHz. Perfect for installations where a flush mount design is desired but demand for high quality audio exists. Features a 4-point mounting system which makes installations fast and easy. Comes complete with mounting support ring and tile rails. No additional accessories needed for most installations. The model C8.2LP is identical to the C8.2 but in a low profile backcan for tight installation spaces.

Specifications

Frequency Response (-10dB) 50 - 20000 Hz

Sensitivity 1W/1m 91 dB

Transformer Taps (Transformer Version Only) (1.88 - 70 V only), 3.75, 7.5, 15, 30

Chassis Size 8 inches

Weight Net 5 kg ( 11.02 lbs )

Dimensions (Height X Max Diameter) 178 x 270 mm
(7.01" x 10.63

EVID 3.2

Larger picture

Loaded with dual 3.5-inch LF drivers and a 3/4-inch Ti direct radiator, the EVID 3.2 produces sound that defies its small size. Its unobtrusive profile is ideal for background music and paging support in a wide variety of environments (e.g., offices, retail stores, restaurants, etc.) Coupled with the 12.1 Subwoofer, two to four EVID 3.2 speakers deliver amazing SPL levels for foreground music. Price is for a pair.

Dimensions (H x W x D) 9.2" x 5.1" x 6.5".
Weight: 3.5 lbs. Sold In PAIRS

EVID 4.2

Larger picture

Perfect for a variety of environments where full-range audio is needed but space is limited: restaurants, bars, bistros, department stores, and out door venues. Offering the bass response of a much larger speaker, dual 4-inch woofers make the 4.2 a phenomenal performer. The 1-inch waveguide coupled titanium tweeter delivers controlled clean mids and highs. Combine it with the 12.1 subwoofer for an amazing listening experience. Full system protection and EV's unique Strong-Arm Mount™ (SAM™) make the EVID 4.2 a solid choice in any environment. Price is for a pair.

Dimensions (H x W x D) 12.2" x 6.9" x 8.5".
Weight: 9 lbs. SOLD IN PAIRS

EVID 6.2

Larger picture

EVID Series Twin 6" Surface Mount Speaker System

Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is perfect for applications that require exemplary audio and the capability to fill large areas with sound. Additionally, the flexible Strong-Arm-Mount™ (SAM™) system provides the versatility to accommodate any installation challenge. EV's unique 6-inch dual woofer design delivers crisp and clean program for the utmost in listening experience regardless of the location. Great for larger areas that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping malls, stadiums, airports, etc.

Specifications

Frequency Response (-10dB)	62 - 20000 Hz
Sensitivity 1W/1m	94 dB
Max. SPL / 1m (calc); full space	122 dB
Coverage (nominal -6dB) H°	100 °
Coverage (nominal -6dB) V°	80 °
System Power Handling (continuous/program/peak)	150/300/600 Watts
Nominal Impedance (Passive)	8 Ohms
Minimum Impedance	6 Ohms
Input Connections	Spring Terminal
Transformer Taps (Transformer Version Only)	70V/100V:15W, 30W, 60W
Chassis Size	6 inches
Weight Net	5.3 kg ( 11.68 lbs )
Dimensions (HxWxD)	419 x 228 x 298 mm (16.5" x 8.98" x 11.73")

SX-80

Larger picture

Ultracompact two-way 8-inch system with 175 watts continuous, 700 watts peak power handling

EV DH2005 pure titanium compression driver for great sound and reliable performance
90° x 65° constant-directivity high-frequency horn
Paintable, black polystyrene enclosure
Push-terminal connectors
Available in paintable white(Sx80W)
Suspension points accommodate Sx80MBB and Sx80MBW wall/ceiling brackets and OmniMount? Series 75 mounting hardware (OmniMount is a registered trademark of OmniMount Systems, Inc.)
Optional Sx80SM stand-mount adapter allows use on 100BK and other speaker stands with 1-3/8-inch diameter
Ring-Mode Decoupling for superior vocal reproduction and smooth, accurate vocals and mids
Dimensions (H x W x D) 15.75" x 11.5" x 8.75"
Weight: 18 lbs.

EV SXMBB Bracket

Larger picture

Wall mounting bracket for the ElectroVoice SX80 Speakers!

Electro Voice Zx-1

Larger picture

Zx1-90 8" 2-way 200watt 18 lbs.

Specifications

Sensitivity 1W/1m 94 dB

Max. SPL / 1m (calc); full space 123 dB

Coverage (nominal -6dB) H° 90 °

Coverage (nominal -6dB) V° 50 °

System Power Handling (continuous/program/peak) 200/400/800 Watts

Nominal Impedance (Passive) 8 Ohms

Chassis Size 8 inches

Weight Net 8.4 kg ( 18.52 lbs )

Dimensions (HxWxD) 451 x 282 x 263 mm
(17.76" x 11.1" x 10.35")

Electro Voice SX-100+E

Larger picture

Specifications

Frequency Response (-10 dB): 60 Hz-25 kHz

Sensitivity: 98 dB

Max SPL: 127 dB

Impedance: 8 ohms Nominal, 5.6 ohms min.

Horizontal Coverage: 65°

Vertical Coverage: 65°

Power Handling: 200W Continuous, 800W Peak

LF Transducer: 12" (300 mm)

HF Transducer: 1" (25 mm) exit DH3 Comp. Driver

Connectors: Neutrik Speakon

Enclosure Material: Copolymer

Grille: Powder Coated Steel

Dimensions (H x W x D): 23.1" x 16.9" x 12.3" (586 x 429 x 312 mm)

Net Weight: 32 lbs (14.5 kg)

Shipping Weight: 35 lbs

EV MB200

Larger picture

Wall mounting bracket for ElectroVoice SX100, SX250, & SX300 Speakers.

EV SXZ100 Powered

Larger picture

The Electro-Voice SxA100+ sets a new standard for powered speakers. Its design provides the user multiple inputs with mix capability, an easy to use EQ section, and plenty of power in very compact, attractive package.

This is a full range loudspeaker ideal for most applications requiring high-quality sound.

Specifications

Frequency Response (-10dB) 55 - 20000 Hz

Max. SPL / 1m (calc); full space 124 dB

Coverage (nominal -6dB) H° 65 °

Coverage (nominal -6dB) V° 65 °

Chassis Size 12 inches

Weight Net 19.5 kg ( 42.99 lbs )

Dimensions (HxWxD) 586 x 429 x 312 mm
(23.07" x 16.89" x 12.28")

Careful attention to the dynamic requirements of music guided the amplifier design to provide high SPL without excessive heat.

The high quality microphone preamplifier provides great sounding vocals or speech. A master level control sets the desired SPL, and the line input can be mixed and balanced with a microphone with its level control. Its linear response is easily optimized for speech or music with the on board multi-band equalization.

Electro-Voice didn't earn its reputation as a premier manufacturer of speakers all at once.

75 years ago Al Kahn set out to revolutionize a growing market by using new techniques in measurement and manufacture. Through the ensuing years, Electro-Voice has been home to many exciting advances in speaker technology. Such breakthroughs as Compound Diffraction Projector technology, Constant Directivity Horns, Manifold Technology, and today's cutting-edge Ring-Mode Decoupling techniques have paved the way for today's exciting line of Electro-Voice speakers.

From commercial applications to high-fidelity pro music and concert systems to houses of worship, Electro-Voice has the right speakers for your application.

SX-250

Larger picture

15-inch two-way speaker system with 350-watt continuous, 1,400-watt peak power handling.

80o x 55o Constant-directivity horn has better projection capabilities than typical 90o horns
High-performance EV DL15BFH cast-frame woofer and DH2010a pure titanium compression driver
Ring-Mode Decoupling delivers rich, smooth vocals and accurate, detailed mids
Dual Neutrik Speakon input connectors for loss-free signal transfer
Built-in metal stand mount.
The enclosure is built of 18 mm plywood and is finished in black Futura, a sprayed-on polyurethane finish that is very rugged
Dimensions (H x W x D) 24.6" x 17.9" x 13.1".
Weight: 49lbs.
The system can be safely suspended using the optional SK-1 hardware kit.

Electro Voice Force 1

Larger picture

Force 115-inch two-way with 250-watt continuous, 1,000-watt peak power handling. 80 x 55 Constant-directivity horn. only 46 lb

Specifications

Frequency Response (-3dB) 50 - 20000 Hz

Sensitivity 1W/1m 100 dB

Max. SPL / 1m (calc); full space 130 dB

Coverage (nominal -6dB) H° 80 °

Coverage (nominal -6dB) V° 55 °

System Power Handling (continuous/program/peak) 1000/2000/4000 Watts

Nominal Impedance (Passive) 8 Ohms

Weight Net 20.9 kg ( 46.08 lbs )

Dimensions (HxWxD) 648 x 465 x 386 mm
(25.51" x 18.31" x 15.2")

Electro Voice Force Sub i

Larger picture

Force Sub i 18-inch sub with 350 watts continuous, 1,400 watts peak power handling. 18-inch woofer only 69 lb

Specifications

Frequency Response (-3dB) 36 - 210 Hz

Sensitivity 1W/1m 100 dB

Max. SPL / 1m (calc); full space 131 dB

System Power Handling (continuous/program/peak) 1400/2800/5600 Watts

Nominal Impedance (Passive) 8 Ohms

Weight Net 31.3 kg ( 69 lbs )

Dimensions (HxWxD) 648 x 518 x 597 mm
(25.51" x 20.39" x 23.5")

Force i25

Larger picture

Dual 15-inch two-way, 600 watts continuous, 1800 watts peak power handling, 80° x 55° Constant-Directivity horn. Dual 15-inch woofers and Eliminator kW style port design delivers incredible bass response. Ring-Mode Decoupling (RMD) delivers pure, detailed vocals with excellent midrange performance. Built-in pocket wheels simplify transport. High power crossover network with protection circuit.

ZX4

Larger picture

Zx4 is capable as an entire system. With an integral pole mount the Zx4 is ready for main mix applications in DJ, band and general entertainment use. To accomodate different stage depths, Zx4 incorporates retractable monitor feet. This allows Zx4 to be used as a stage monitor with a 45° or 55° angle.

Every detail of your music is reproduced from extended highs to powerful lows. The DH3 compression driver with its pure titanium diaphragm, coupled with the Zx4's large 90° x 50° horn allows for tremendous intelligibility and pattern control. The EVS15-SF 15" LF delivers tight, low bass and outstanding power handling capacity.

The rugged enclosure of the Electro-Voice&174; Zx4 is perfect for portable main mix and monitor applications, while the stylish design gives it appeal in even the trendiest of environments. At only 20.2 kg (44.5 lbs), the lightweight Zx4 allows ease of transport and set up.

Eliminator i

Larger picture

15-inch Two-way High-output Stage System
350 Watts Continuous
RMD™ for Improved Clarity and Presence

Specifications:

Frequency Response, Measured at 10 feet on axis (normalized to 1 watt/ 1 meter): 50 - 20,000 Hz ±3 dB
Long-Term Average Power Handling, EIA Standard RS-426-A: 350 watts
Sound Pressure Level, 1 W/1 m: 99 dB
Dispersion Angle Included by 6-dB Down Points on Polar
Responses, Indicate One-Third-Octave Bands of Pink Noise,
- 2,500 Hz - 20,000 Hz, Horizontal: 60° (+14°, -25°)
- 2,500 Hz - 20,000 Hz, Vertical: .40° (+12°, -0°)
Crossover frequency: 1600 Hz
Impedance:
- Nominal 8 ohms
- Minimum 5.3 ohms
Input connectors: Parallel 1/4-inch phone jacks
Enclosure Finish: Black carpeted
Dimensions,
- Height: 76.8 cm (30.25 in.)
- Wide: 42.9 cm (16.9 in.)
- Depth: 60.9 cm (24 in.)
- Net Weight: 34.4 kg (76 lbs)
- Shipping Weight: 38.1 kg (84 lbs)

Eliminator ii

Larger picture

Two 15 inch drivers provide very high output at the lower frequencies. When extended high output low-frequency operation is required, performance can be further enhanced by biamping the Eliminator ii™ with the Eliminator i™ Sub. Vented enclosures offer excellent power handling and low distortion in the lowest octave of rate operation. However, it is always advisable to filter material below enclosure tuning to further improve system output and headroom. The Eliminator ii™ should be high-pass filtered to reduce subsonic material below 40 Hz.

Specifications

Frequency Response, Measured at 10 feet on axis (normalized to 1 watt/ 1 meter): 50 - 20,000 Hz ±3 dB

Long-Term Average Power Handling, EIA Standard RS-426-A: 600 watts
Sound Pressure Level, 1 W/1 m: 100 dB
Dispersion Angle Included by 6-dB Down Points:
- Horizontal: 60°
- Vertical: 40°
Transducer Complement:
- High Frequency: DH2010A HP64M constant directivity
- Low Frequency: 2x DL15BFH
Enclosure Tuning: 46 Hz
Crossover frequency LF/HF: 1600 Hz
Impedance:
- Nominal 4 ohms
- Minimum 3.3 ohms
Input connectors:
- Parallel Neutrik® model NL4MP
Enclosure Finish: Black carpeted
Dimensions
- Height: 46 in. (116.84 cm)
- Wide: 17.4 in. (44.20 cm)
- Depth: 24.25 in. (61.6 cm)
- Net Weight: 119 lbs (53.98 kg)
- Shipping Weight: 129 lbs (58.51 kg)

EV Eliminator Sub i

Larger picture

18-inch sub with 400 watts continuous, 1,600 watts peak power handling
Built-in passive crossover and unique acoustical design allows parallel operation with Eliminator i or Eliminator i Double on a single amplifier channel
Tour-proven cast-frame DL18MT woofer delivers solid bass and reliable performance
Strong, light RoadWood enclosure is covered in industrial-grade black carpet that resists damage from transportation
Comes with corner protectors, EV's comfort-lift handles, metal stand mount and 18-inch steel pole to elevate satellite speaker
Weighs 74 lb / 33.6 kg

Specifications
Frequency Response: .......................... 40-100 Hz, ±3 dB
Long-Term Average Power Handling,
EIA RS-426A: ........................................................ 400 watts
AES (1984): ........................................................... 500 watts
Sound Pressure Level, 1 W/1 m:
Full space .................................................................... 98 dB
Half space .................................................................. 101 dB
Crossover: ....................... Acoustic/electronic filter output
Transducer Complement: ......................... 1 ea DL18BFH
Impedance,
Nominal: .................................................................... 8 ohms
Minimum: ............................................................... 5.1 ohms
When used with Eliminator i™ in satellite configuration nominal
4 ohms, minimum 3.2 ohms.

Enclosure Tuning: ................................................... 50 Hz
Input connectors:
1/4-in. phone input
1/4-in. phone output to Eliminator i™
Enclosure material/construction: ... Black carpeted MDF
Dimensions:
Height: ....................................................... 85.9 cm (33.8 in)
Width: ..................................................... 43.8 cm (17.25 in.)
Depth: ..................................................... 61.0 cm (24.13 in.)
Net Weight: ..................................................39.5 kg (87 lb)
Shipping weight: ........................................43.1 kg (95 lb)

Eliminator KW Dual 18" Sub

Larger picture

Eliminator KW

Dual 18-inch sub with 1,000 watts continuous, 4,000 watt peak power handling.
Tour-proven DL18MT cast-frame woofers deliver solid, reliable performanc
Oversized vent in the center of the enclosure allows the woofers to move more air with less cone movement and helps prevent power compression
Rear-mounted pocket wheels and EV's comfort-lift handles allow one person to move the system comfortably
Comes with corner protectors, EV's comfort-lift handles, metal stand mount and 18-inch steel pole to elevate satellite systems.

GeneralDescription:
The Eliminator kW dual 18-inch subwoofer is designed to add high-output, high-impact deep bass response to any sound system. The Eliminator kW uses EV DL18 woofers that provide high excursion capability and resistance to overload for increased reliability and long life. Although it is part of the Eliminator i family, the Eliminator kW may be used to augment the performance of any EV speaker system. The Eliminator kW can move tremendous amounts of air at low frequencies thanks to its combination of innovative enclosure design and powerful EV drivers. In the center of the enclosure are large slotted vents optimized for maximum low frequency efficiency. The vents are tuned to 38 Hz to deliver more low bass than most professional woofer systems. The enclosure is built of RoadwoodTM, a composite material that is void-free and unaffected by temperature and humidity. RoadwoodTM is half the weight and twice the strength of particleboard. The Eliminator kW is easily moved by only one person thanks to its rear-mounted pocket wheels and comfort-lift handles. The enclosure is covered in black industrial-strength carpeting that holds up well under the demands of portable audio. It comes complete with a metal stand mount and 18-inch steel pole for elevating another system. A heavy 18-gauge steel grille protects the woofers. Paralleled Neutrik Speakon input connectors are used exclusively for reliable, loss-free signal transfer.

Specifications::
• Two powerful EV DL18 woofers have 1000 watt continuous, 4000 watt peak power handling and 101 dB sensitivity to deliver 131 dB continuous, 137 dB peak output
• Large, slotted vents in the middle of the enclosure move more air with less vent compression for greater low-bass output
• Sealed tilt-back pocket wheels and rear mounted handles allow easy one-person portability
• Integral 1-3/8 inch metal stand mount and 18 inch pole included for elevating full-range speakers above the sub
• Strong RoadwoodTM enclosure is heavily braced and covered in black industrial-grade carpeting
• Made in the U.S.A.

Electro Voice FRi-122/64

Larger picture

FRi-122/64

FRi Series Speaker System

Compact two-way 12-inch medium- and short-throw full-range system Bass to 50 Hz (-10 dB) perfect for voice-only systems or add FRi-181s sub for great bass

Specifications

Frequency Response (-10dB)	50 - 15000 Hz
Recommended High-Pass Frequency	50 Hz
Sensitivity 1W/1m	97 dB
Max. SPL / 1m (calc); full space	128 dB
Coverage (nominal -6dB) H°	60 °
Coverage (nominal -6dB) V°	40 °
System Power Handling (continuous/program/peak)	300/600/1200 Watts
Crossover Frequency	1600 Hz
Nominal Impedance (Passive)	8 Ohms
Input Connections	Barrier Strips (Dual)
Chassis Size	12 inches
Weight Net	27.3 kg ( 60.19 lbs )
Dimensions (HxWxD)	711 x 401 x 445 mm (27.99" x 15.79" x 17.52")

Electro Voice FRi-181S

Larger picture

FRi+ 181S

FRi+ Series Speaker System

18-inch low-frequency system l Extends FRi bass to 36 Hz l Built-in Low-pass filter -- may be traditionally biamped or simply connected in parallel with full-range systems | Vented slot load design | Trapezoidal (7.5° per side) | Comes with 4 eyebolts | 16 x 3/8”-16 suspension points

Specifications

Sensitivity 1W/1m	97 dB
Max. SPL / 1m (calc); full space	129 dB
System Power Handling (continuous/program/peak)	400/800/1600 Watts
Flying	Optional
Internal Crossover	No
Chassis Size	18 inches
Weight Net	45.5 kg ( 100.31 lbs )
Dimensions (HxWxD)	711 x 597 x 762 mm (27.99" x 23.5" x 30")

Electro Voice Qrx 218S

Larger picture

QRx 218S

QRx Series Loudspeaker System

Dual 18-inch sub with 1,200 watt continuous, 4,800 watts peak power handling.Easily delivers 133 dB SPL 1 w/1 m (139 dB peaks 1 w/1 m) at full power Two concert-proven EVX180B woofers with 4-inch voice coils have incredible fatigue resistance and excellent long-term reliability. Usable response extends to 31 Hz. Enclosure is built of 13-ply, void-free, grain-oriented Birch plywood finished in Futura, a sprayed-on polyurethane finish that is very rugged. Available in black or white. Standard versions of the QRx218S are equipped with rear-mounted pocket wheels and handles to allow one person to comfortably move the enclosure. The standard versions also have a metal stand socket and are shipped with a 34-inch steel pole for elevating satellite speakers. The QRx218S is available with L-track rigging as a special order option. The rigging versions have L-track on the top and bottom plus a single-stud pull-up point on the back. The rigging versions do not come with wheels or a stand mount.

Specifications

Frequency Response (-3dB)	35 - 125 Hz
Frequency Response (-10dB)	35 - 250 Hz
Recommended High-Pass Frequency	35 Hz
Sensitivity 1W/1m	99 dB
Max. SPL / 1m (calc); full space	134 dB
System Power Handling (continuous/program/peak)	1200/2400/4800 Watts
Nominal Impedance (Passive)	8 Ohms
Flying	Optional
Internal Crossover	No
Chassis Size	18 inches
Weight Net	68 kg ( 149.91 lbs )
Dimensions (HxWxD)	11015 x 560 x 600 mm (433.66" x 22.05" x 23.62")

EV Dynacord Cobra-2 System

Larger picture

COBRA-TOP - 600 watts RMS / 1200 watts cont.program/ 8 ohms Passive 3-way fullrange / mid-high component of the COBRA-2 system. Capable of being flown. Equipped with a 15" Electro-Voice DL15Y speaker for the low frequency range, a coaxially arranged midrange line array consisting of four C 8 conical MF horns and a DH 2T titanium driver with a CD horn for the high frequency range.
COBRA-SUB - 600 watts RMS / 1200 watts cont.program/ 8 ohms Bass-reflex subwoofer armed with an Electro-Voice 18" EVX 180 B driver. Capable of being flown. Countersunk grooves for secure stacking and four ANCRA flying rails for flown sub-arrays are included.
COBRA PWH - 600 watts RMS / 1200 watts cont.program/ 8 ohms Planar waveguide horn subwoofer with Electro-Voice 18" EVX 180 B driver for especially powerful and penetrating bass reproduction in the COBRA-2 and COBRA-4 systems.
CSR-12 - 2x 1200 watts / 4 ohms SUB and 2x 1200 watts / 4 ohms TOP Ready-cabled 12 U stereo amp rack with pre-programmed DSP 244 controller, two L2400 power amps for the sub and mid-high ranges as well as the CP-44 connector panel for the LF controller, the speaker system cabling and the AC connection.