Matrix 1000 V2
Matrix1000V2Pointer
Larger picture
A complete sound reinforcement solution. The MATRIX-1000 V2 includes two 10 two-way powered satellites and a dedicated powered 15 subwoofer. The MATRIX-1000 V2 has a built-in three-channel 700-watt power amplifier, three distinct volume controls, electronic crossover with equalization and VCA compressor.

The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you re ready to go

Built-in 3-channel amplifier
The 15 subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15 subwoofer. The rear chamber houses all of the system s electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15 subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.

10" satellite speakers
The MATRIX-1000V2 satellites are loaded with a custom designed 10 speaker and 1 titanium diaphragm compression driver. The horn is a 90 x 60 elliptical waveguide that can be rotated 90° to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also include 3/8 16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing you to stack, roll and transport the entire MATRIX-1000V2 in and out of a venue in record time.

Transporting the system
To transport the MATRIX-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you re ready to move the MATRIX-1000 V2 with ease.

Suggested applications:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio / Video * Home Entertainment System * Live Sound System

Matrix 2000
matrix2000
Larger picture
MATRIX-2000
1200-WATT ACTIVE THREE-PIECE SYSTEM

The MATRIX-2000 is a complete sound reinforcement solution consisting of two 12” two-way speakers and an 18” subwoofer, equipped with a built-in 1200-watt three-channel amplifier. The three-channel amplifier houses all the electronics required to run the system including electronic crossovers, equalization and compressors. The electronic circuity is fine tuned to match all of the components for the best possible sound.
The MATRIX-2000 is designed for easy operation, as you do not need to tweak frequencies or finesse levels. To set-up the system’s components, simply connect the XLR right and left signal cables, speaker cables and power cord and you’re ready to go!

 

TRANPORTING THE SYSTEM:
Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer’s front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side
of the subwoofer cabinet.

B-52 MX-15
b52 mx15
Larger picture

The B-52 MX-15 15" 2-Way 300W Speaker is ideal for live sound and music replay with 40Hz-19kHz frequency response and superior sonic accuracy. The MX-15 features a high-performance 15" loudspeaker and 1" exit titanium diaphragm compression driver. The MX-15's rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Finished with impact-resistant black carpet. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. A polemount adapter allows the MX-15 to play above a crowd with strong projection.

B-52 MX-15 15" 2-Way 300W Passive Speaker Features:

  • 300W handling
  • High-performance loudspeaker and 1" exit titanium diaphragm compression driver
  • Metal bar handles
  • 16-gauge perforated steel grille
  • Rubber feet
  • Protective metal corners
  • 2 - 1/4" metal phone jack inputs
  • Neutrik NL4 input
  • Impact-resistant black carpet
  • Polemount adaptor

B-52 MX-15 15" 2-Way 300W Passive Speaker Specifications:

  • Nominal impedance: 8 ohms
  • Frequency response: 40Hz-19kHz
  • High-freq. dispersion: 90 x 40
  • Crossover points: 1.6kHz
  • Power handling: 300 watts
  • SPL @ 1w1m: 97dB
  • Peak SPL: 128 dB
  • Dimensions: 19"W x 27"H x 17"D
  • Weight: 66 lbs.

B-52 MX-18S
b52 mx18S
Larger picture

Extend the low-frequency response of any MX-Series full-range system to its lowest octave with the B-52 MX-18S 18" 550W Subwoofer. The MX-18S uses an American-made cast-frame 18" subwoofer with a 3.5" high-temperature polyamide voice coil. The rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet, and protective metal corners. Finished with impact-resistant black carpet. Input connectors include 2 - 1/4" metal phone jacks and a genuine Neutrik NL4 connector. A polemount adapter provides for easy installation of a metal tube to support the MX-15.

B-52 MX-18S 18" 550W Subwoofer Features:

  • 300W
  • High-performance loudspeaker and 1" exit titanium diaphragm compression driver
  • Metal bar handles
  • 16-gauge perforated steel grille
  • Rubber feet
  • Protective metal corners
  • 2 - 1/4" metal phone jack inputs
  • Neutrik NL4 input
  • Impact-resistant black carpet
  • Polemount adaptor

B-52 MX-18S 18" 550W Subwoofer Specifications:

  • Nominal impedance: 8 ohms
  • Frequency response: 30-160Hz
  • Power handling: 550W
  • SPL @ 1w1m: 99dB
  • Peak SPL: 130dB
  • Dimensions: 23"W x 26"H x 22"D
  • Weight: 90 lbs.

B-52 MX-1515
b52 mx1515
Larger picture

The B-52 MX-1515 combines substantial SPL and accuracy from a very compact two-way cabinet. The 1" exit titanium compression driver delivers smooth and detailed highs while the dual B-52 15-85 woofers produce tight, punchy low end. The MX-1515 can be used as a stand-alone system or in combination with the MX-18S subwoofer.

The B-52 MX-Series is designed for live sound, small venue installations and mobile DJ/KJs. B-52 components include high-performance loudspeakers and 1" exit titanium diaphragm compression drivers. Each rugged cabinet features metal bar handles, 16-gauge perforated steel grille, rubber feet and protective metal corners. Input connectors include 2 - 1/4 metal phone jacks and a genuine Neutrik NL4 connector. Each cabinet is finished with impact-resistant black carpet.

B-52 MX-1515 Dual 15 2-Way 600W Speaker Specifications:

  • Nominal Impedance: 4 Ohms
  • Frequency Response: 40-19kHz
  • High-Freq. Dispersion: 90 x 40
  • X-Over Points: 1.6kHz
  • Power Handling: 600 watts
  • SPL @ 1w1m: 99 dB
  • Peak SPL: 130 dB
  • Dimensions (W x H x D ): 19 x 45 x 18
  • Weight (lbs): 98 lbs

B-52 LX-1515
b521515
Larger picture

The LX-1515 is designed for mobile live sound and music replay applications and is the perfect companion for the LX-18. Dual 15" 2-way system is ideal for bands, medium-sized venue installations, corporate A/V, or mobile DJs because of its exceptional performance, tremendous value, and extreme portability. The LX-1515 handles 800W and combines high output and sound clarity with crisp highs and deep, well-defined bass. It utilizes the B-52 15-120 loudspeaker with a 3" polyamide voice coil and a 120-oz. magnet. The large-format 90° x 40° dispersion horn is coupled to a 2" titanium diaphragm compression driver. The compression driver delivers smooth, detailed highs for music replay applications and the accurate vocal articulation needed for live sound.

Fitted with metal bar handles, protective metal corners, rubber feet, and a 16-gauge perforated steel grille. Finished with impact-forgiving black carpet.

B-52 is the only company in the world that offers a LIFETIME warranty on its compression drivers.

B-52 LX-1515 PA Speaker Features:

  • Rugged build
  • Dual 15" woofers, 90° x 40° HF compression driver
  • Metal handles and corners
  • 800W RMS power handling

B-52 LX-1515 PA Speaker Specifications:

  • Impedance: 4 ohms
  • Frequency response: 35Hz-19kHz
  • Hi-frequency dispersion: 90° x 40°
  • RMS power handling: 800 watts
  • Peak power handling: 1,600 watts
  • SPL @ 1w/1m: 101dB
  • Peak SPL: 133dB
  • Input connections: 2 x 1/4" phone jacks, one Neutrik NL-4 Speakon connector
  • Dimensions: 24"W x 48"H x 18"D
  • Weight: 122 lbs

B-52 LX-18
b52LX18
Larger picture

B-52 LX-18 V2 18" 1000W Folded Horn Subwoofer Features:

  • Finished in a rugged, impact-resistant black carpet
  • Void-free, 7-layer, 3/4 plywood construction for maximum durability and minimum weight
  • Input connections: (2) 1/4 metal phone jacks; (1) Neutrik NL 4 Speakon Connector
  • Reinforced internal bracings are used to fortify the LX-18

    V2 Upgrades:
  • B-52 18-200X subwoofer
  • Increased power handling
  • Higher overall efficiency
  • Aluminum heatsink front panel

B-52 LX-18 V2 18" 1000W Folded Horn Subwoofer Specifications:

  • Nominal Impedance: 8 Ohms
  • Frequency Response: 30-160 Hz
  • Power Handling: 1000 watts
  • SPL @ 1w1m: 108
  • Peak SPL: 138
  • Dimensions (W" x H" x D"): 24 x 36 x 36
  • Weight (lbs): 172


SF