FBT

FBT Amico 1000 Sound System

Larger picture

Processed Active Sound System 3 way Bass-Reflex system

• • 600W+2x150W
• • 15 channel mixer with phantom powering, plus new onboard digital multi-effects processor offering 256 presets
• • 15” sub-woofer equipped with neodymium magnet assembly and 3” coil
• • 2 satellites with 6.5” woofers fitted with 1+1/2” coils plus 1” compression drivers with constant directivity 90°x60° horns
• • 1 x 600 Watt (RMS) Internal Amplifier with PWM technology for the SUB
• • 2 x 150 Watt (RMS) Internal Amplifiers with class G technology for the satellites
• • ADAP protection circuitry (Advance Dynamic Active Protection) for total component protection

FBT Jolly 5BA

Larger picture

Processed Active Monitor 60W+20W

• • 2-way bi-amped bass-reflex speaker system with 130 mm woofer and 25 mm tweeter
• • Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• • Stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• • Extended 90° x 90° dispersion angle
• • Very high power (112dB SPL) and compact dimensions for an unlimited range of applications: personal monitor, piano-bars, home entertainment systems, and fixed installations in clubs, pubs, gyms, conference rooms, etc.
• • Custom 130 mm high efficiency woofer
• • 25 mm tweeter
• • Built-in amplifiers: 60W rms for the woofer and 20Wrms for the tweeter
• • 24dB/oct active filters
• • Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, mic/line switch, 2 Band EQ – (high/low), limiter, volume control
• • Available as white finish version: JOLLY 5baw

FBT Jolly 8BA

Larger picture

Processed Active Monitor 150W+50W

• • 2-way bi-amped bass-reflex speaker system with 200 mm woofer and 25 mm high frequency unit
• • Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• • Integral handle, stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• • Custom 90° x 60° dispersion horn
• • Asymmetrical trapezoidal shape for use as a stage monitor
• • An ideal choice for live performance applications thanks to the reduced dimensions in relation to the hefty 119dB SPL, along with frequency response that excels in terms of linearity and extension.
• • Enormous application versatility: band P.A.s, piano-bars, home and live monitors, and fixed installations in live music club venues, pubs, gyms, and all other venues requiring high sound pressure combined with compact dimensions
• • Custom 200 mm high efficiency high excursion woofer
• • Custom 25 mm compression tweeter
• • Built-in amplifiers: 150W rms class G for the woofer and 50W rms for the high frequency unit
• • ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and ensure complete reliability of the system even in extreme conditions
• • 24dB/oct active filters
• • Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, mic/line switch, 2 Band EQ – (high/low), limiter, volume control

FBT Maxx 2

Larger picture

Sound Reinforcement Monitor 200W

• • Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• • Custom horn, handled and stand adapter built into the structure
• • It can be used in all audio-professional amplification systems
• • Profile for use as a stage monitor
• • Four anchoring points (M10) for wall and ceiling installation
• • Full access to controls in all conditions of use
• • 2-way 4 or 8 ohm available
• • 10” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• • 1” Compression driver
• • Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• • Drivers protected against overload and acoustic feedback
• • Flat frequency response over the entire dispersion angle
• • Recommended amplifier 250W Ohm
• • SPL 121/124 dB
• • Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links
25

FBT Maxx 2A

Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
Custom horn, handled and stand adapter built into the structure
It can be used in all audio-professional amplification systems
Profile for use as a stage monitor
Four anchoring points (M10) for wall and ceiling installation
Full access to controls in all conditions of use
2-way bi-amplification system:
woofer with power stage of 200W rms with AB class
driver/horn with power stage of 50W rms AB class
10� custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
1� Compression driver
ADAP (r) (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
Active electronic filter 24 dB/oct
Control panel highly professional with XLR/Jack Neutrik(r) input, XLR Neutrik(r) Link, Gain, 3-band equalizer (High-Mid-Low), Volume

FBT Maxx 4

Larger picture

Sound Reinforcement Monitor 300W

• • Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• • Custom horn, handled and stand adapter built into the structure
• • It can be used in all audio-professional amplification systems
• • Asymmetric profile for use as a stage monitor
• • Four anchoring points (M10) for wall and ceiling installation
• • Provided with adapters to stack the enclosures
• • Full access to controls in all conditions of use
• • 2-way 4 or 8 ohm available
• • 320 mm custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• • 1” compression driver
• • Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• • Drivers protected against overload and acoustic feedback
• • Flat frequency response over the entire dispersion angle
• • Recommended amplifier 300W
• • SPL 123/126 dB
• • Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

FBT Maxx 4A

Larger picture

Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
Custom horn, handled and stand adapter built into the structure
It can be used in all audio-professional amplification systems
Asymmetric profile for use as a stage monitor
Four anchoring points (M10) for wall and ceiling installation
Provided with adapters to stack the enclosures
Full access to controls in all conditions of use
2-way bi-amplification system:
woofer with power stage of 300W rms with PWM �Pulse Width Modulation� technology, driver/horn with power stage of 100W rms in class AB
320 mm custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
1� compression driver
ADAP � (Advanced Dynamic Active Protection) processor for total transducer protection and� optimizing acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
Active electronic filter (24 dB/oct.)
Highly professional control panel with XLR/Jack Neutrik TM, input � XLR Neutrik TM, Link - Gain plus Mic/Line selector, 3-band equalizer (High-Mid-Low), Volume

FBT Maxx 5

Larger picture

Sound Reinforcement Monitor 400W

• • Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• • Custom horn, handled and stand adapter built into the structure
• • It can be used in all audio-professional amplification systems
• • Profile for use as a stage monitor
• • Four anchoring points (M10) for wall and ceiling installation
• • Full access to controls in all conditions of use
• • 2-way 4 or 8 ohm avalilable
• • 380 mm custom B&C speaker with 64 mm coil with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• • Compression driver with 25 mm coil and 36 mm shaft
• • Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• • Drivers protected against overload and acoustic feedback
• • Flat frequency response over the entire dispersion angle
• • Recommended amplifier 400W
• • SPL 124/127 dB
• • Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

FBT Maxx 9SA

The lightweight, sturdy enclosure is made from shock-resistant polyethylene with rotomoulding
Handles built into the structure
Stand adapter
It can be used in all audio-professional amplification systems to enhance the low frequencies
Wall or ceiling installation available on request
Sub-Woofer system with power stage of 900W rms, PWM �Pulse Width Modulation� technology making it possible to decrease the weight in the ratio 1:3, achieving a level of efficiency 3 times higher than that of conventional technology
380mm custom speaker with coil of 100mm with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
ADAP � (Advanced Dynamic Active Protection)
Control panel for right and left channels with: XLR/Jack Neutrik TM, input XLR Neutrik TM, Link, Filtered signal output (high-pass) for satellites, General volume