RCF

The RCF ART 310-A is an active, wide dispersion 2 way sound reinforcement speaker. It incorporates a high power 350 watt amplifier, a complete electronic processor section and RCF low distortion, high power neodymium transducers. The system is unique in its class for output and vocal intelligibility. The new 10" neodymium woofer is the result of the latest refinement in year of RCF experience in compact 2 way speakers. it features a 2.5" voice coil, very high efficiency and controlled bass reproduction.

The compression driver uses a new 1.5" Mylar dome design and optimised geometry radial phase plug. This innovative design is powered from a high flux neodymium magnet offering a very open and natural midrange sound with extreme precision in high frequency reproduction. A generous 2 step class H design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.

Incredibly lightweight, ART 310-A uses high efficiency TAED amplifier and neodymium woofer and compression driver for the maximum output in the minimum weight ever seen in the 10" active speaker.

The input section presents a XLR input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop through link guarantee the best versatility. The processor section includes active crossover, system equalisation, transducers phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.

All the system is housed in a strong, very lightweight, polypropylene composite enclosure. The woofer is protected by a strong, powder coated, metal grille. The cabinet features (2) M10 threaded fly points, a 35mm stand adaptor plus an ergonomic top handle for easy transportation.

• 350 watt Monolithic bi-amplification, 300 watt low frequency and 50 watt high frequency power
  
• 127 dB max SPL
  
• Wide dispersion, 90 x 70 low distortion, constant directivity horn
  
• 10" high power woofer, 64mm in/out aluminium coil
  
• 1" neodymium, high frequency driver
  
• Electronic equalization, phase alignment, limiter and protection
  
• Mic/Line XLR input, XLR signal output
  
• 1 comfortable top handle for easy transportation and positioning
  
• Two M10 fly points and built in pole mount adaptor
  

Specifications:
Crossover Frequency:	1800 Hz
Dimensions (W-D-H):	21.1" X 13.3" X 12.4" Inches
Dispersion:	90x70 Degrees
Frequency Response:	50Hz - 20KHz
HF Driver:	1" Neodymium
Input Connectors:	XLR and 1/4" TRS
Input Sensitivity:	0 dBu
LF Driver:	10" Neodymium
Max SPL:	127 dB
Program Power Rating:	350 Watts
Weight:	27.3 Lbs

ART 312-A is the optimum choice for situations where an exceptional full range, outstanding bass reproduction and accurate high frequency delivery is required. The ART 312-A is also suitable for monitoring applications.

Features:

• 350 watt Monolithic bi-amplification, 300 watt low frequency and 50 watt high frequency power
  
• 127 dB SPL peak
  
• Wide dispersion, 90x60 low distortion, constant directivity horn
  
• 12" high power woofer, 64mm edge wound aluminium coil
  
• 1" neodymium, titanium dome, high frequency driver
  
• Electronic equalization, phase alignment, limiter and protection
  
• Mic/Line combo XLR/Jack input
  
• XLR signal output
  
• 2 side handles and 1 comfort designed top handle for easy transportation and positioning
  
• Four M10 fly points and built in pole mount adaptor
  
• Optional Infrared remote control for volume, mute and EQ adjustment

Specifications:
Dimensions (L-W-H):	26.7" X 15.9" X 13.6" Inches
Dispersion:	90 X 60 Degrees
Frequency Response:	50-20Khz
HF Driver:	1" Neo
Input Connectors:	XLR/1/4" Combo Jack
Input Sensitivity:	0 dBu
LF Driver:	12"
Max SPL:	127 dB
Output Connectors:	XLR
Program Power Rating:	50 HF - 300 LF Watts
Weight:	41.8 Lbs

RCF ART 315-A is an active, wide dispersion 2 way sound reinforcement speaker. It integrates a high power 350 Watt amplifier, a complete electronic processor section and RCF low distortion, high power transducers. The result is a compact, high power accurate system, unique in his class for clarity and low distortion.

The new 15" inch woofer is the result of the latest refinement in years of RCF experience in compact 2 way speakers, resulting in an accurate reproduction of the midbass frequency range and a tight punchy bass.

The compression driver uses a new 1.5" titanium dome in front of a low compression, optimised geometry, radial phase plug. This innovative design is powered from a high flux neodymium magnet offering a very open and natural midrange sound with extreme precision in high frequency reproduction.

A generous 2 step class H design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.

The input section presents an XLR and Jack input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop-through link guarantee the best versatility. The processor section includes active crossover, system equalization, transducer phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.

All components are housed in a strong, lightweight, polypropylene composite enclosure. Woofer and compression driver throat are protected from a strong, powder coated, metal grille. The cabinet features four M10 threaded fly points, a 35 mm stand adaptor plus two side handles and an ergonomic top handle.

Features:

• 350 watt Monolithic bi-amplification
  
• 300 watts to low frequency transducer
  
• 50 watts to compression driver
  
• 128 dB SPL peak
  
• Wide dispersion, 90x60 low distortion, constant directivity horn
  
• 15" high power woofer, 64mm edge wound aluminium coil
  
• 1" neodymium, titanium dome, high frequency driver
  
• LICC low impedance compensated crossover, electronic driver protection
  
• Mic/Line XLR and Jack input
  
• XLR output
  
• 2 side handles and 1 ergonomic top handle for easy transportation and positioning
  
• Four M10 fly points and pole mount adaptor
  

Specifications:
Active or Passive?:	Active
Crossover Frequency:	1800 Hz
Dimensions (L-W-H):	26.7" X 15.9" X 13.6" Inches
Dispersion:	90x60 Degrees
Frequency Response:	50-20Khz
HF Driver:	1" neo
Input Connectors:	XLR / 1/4" Combo
Input Sensitivity:	0 dBu
LF Driver:	15" Woofer
Max SPL:	128 dB
Output Connectors:	XLR Male
Program Power Rating:	50 HF - 350 LF Watts
Weight:	44 Lbs

 ART 325-A is the reference speaker in the new ART series. Ideal for installed situations, it is remarkable for clean midrange output and accurate high frequencies. Offering the ultimate intelligibility in vocal and Recorded Music, from live sound to playback, from monitoring to fixed installation applications.

Features:

• 400 watt Monolithic bi-amplification, 350 watt low frequency and 50 watt high frequency power
  
• 129 dB SPL peak
  
• Wide dispersion, 90x60 low distortion, constant directivity horn
  
• 15" high power woofer, 75mm inside/outside aluminium coil
  
• 2" neodymium, titanium dome RCF Precision Series high frequency driver
  
• Electronic equalization, phase alignment, limiter and protection
  
• Mic/Line combo XLR/Jack input, XLR signal output
  
• 2 side handles and 1 ergonomic top handle for easy transportation and positioning
  
• Four M10 fly points and built in pole mount adaptor
  
• Optional Infrared remote control for volume, mute and EQ adjustment

Specifications:
Active or Passive?:	Active
Crossover Frequency:	1200 Hz
Dimensions (L-W-H):	26.7" X 15.9" X 13.6" Inches
Dispersion:	90 X 60 Degrees
Frequency Response:	45-20Khz
HF Driver:	2" Neo
Input Connectors:	XLR / 1/4" combo jack
Input Sensitivity:	0 dBu
LF Driver:	15" Woofer
Max SPL:	129 dB
Output Connectors:	XLR
Program Power Rating:	50W HF - 350 LF Watts
Weight:	52.9 Lbs

High current 400 watt RMS class H amplifier 127 dB max SPL 15" high power woofer, 3" inside/outside copper coil. Response down to 40 Hz. Selectable high pass crossover: 80Hz, 100Hz, 120Hz Phase switch. Recessed line level control System status LED's Electronic limiter and protection. Mono/Stereo combo XLR/jack input.

Mono/Stereo XLR signal output. Mono/Stereo XLR high pass output. Baltic birch compact enclosure and two side handles Built in pole mount, two M10 points for optional speaker kart. Dimensions: 17.13"(w) x 23.23"(h) x 23.62"(d) Weight: 91 lbs

RCF 4PRO 8001-AS: 18´´ Sub Takes Things To A New Low!

Gain subsonic superiority with this active, high output, bass reflex subwoofer system.

ARTSM-Bag Fits the ART-310a $69

ARTLG-Bag Fits ART-312a through 325a $69

RCF MA-4X CEILING MOUNTING BRACKET FOR 33T/44T/55

Ceiling mounting bracket for up to 4 Monitor Series cabinets models MR 33T, MR 44T, or MR 55 in cluster installations.