PHONIC SOUND AMBASSADOR 75 PORTABLE PA SPEAKER
phonic_amb75
Larger picture

PHONIC SOUND AMBASSADOR 75 PORTABLE PA SPEAKER

The Phonic Sound Ambassador 75 is an Active PA Speaker with a built-in 4 channel mixer. The unit can be further customized to include two wireless UHF microphones. Other important features include XLR microphone inputs on channels 1 and 2, line input channels with 1/4" and XLR or RCA inputs - all with individual volume controls. A Link Out connector with a 1/4" phone jack and XLR jack enables two Sound Ambassadors to be linked together to further enhance your set up. Additional speakers can also be added to share the power from the amplifier through the Speaker Out jack. Channels 1 through 3 are topped off with 2-band EQs, and the unit further features master volume control, a built-in limiter, and protection circuitry. The DC power inlet allows the Sound Ambassador to be used in conjunction with portable battery packs, ensuring you're always able to use it - even when an AC power source is unavailable. All of these features combine to make the Sound Ambassador 75 a must-have for touring bands, clubs and karaoke.


Features:
  • Active speaker with wireless mic slots and compact mixer
  • Luxury molded cabinet that can be used as a floor monitor or mounted as a raised sound reinforcement speaker
  • 2 wireless microphone receiver slots for optional wireless microphones
  • Flexible, stackable configuration (can be mounted on tripod or wall-mount kit)
  • Operates on DC or AC power
  • Less weight by switching power supply
  • 4 input channels including 2 mic preamps and 4 line inputs
  • Built-in mixer with independent Treble and Bass EQ for channel 1- 3
  • Separate channel with stereo RCA inputs for CD or tape player
  • 2-way speaker with 10" woofer and 1" compression tweeter
  • 75 Watts built-in power amplifier
  • Peak indicator on master control
  • Link out and speaker out features allowing connection to another active or passive
  • Amp in feature allows external signal to use the built-in power amplifier
  • Protection system including over-heat, speaker short circuit, limiting and HF speaker driver
  • AC source selected from 115VAC or 230VAC

Phonic Performer A230 12" 275-watt Active Speaker
phonica230
Larger picture
  • Bi-amplified design with 275 Watts (RMS)
  • Switchable Mic/Line balanced input
  • Low cut filter: 75 Hz, 18 dB / octave
  • Contour switch with 5 dB boost @ 120 Hz (1/3 octave), 5 dB boost @ 10.5 kHz (1/3 octave)
  • Built in limiter for overload protection and limiter indicator
  • Wireless UHF system
  • Lightweight speaker cabinet with dynamic sound

    • Phonic Sonic Station 16 16 mono, 4 stereo, 4 buss
    phonic_SONICSTATION16
    Larger picture
    Sonic Station 16 is bursting with inputs! Every channel has a mic preamp and balanced line input with tons of options. The 3-band EQ with swept mid, insert points for connection to external processors, 6 AUX send mixing bus (2 AUX sends with pre/post buttons), and 8 direct outputs for multi-track recording allow users incredible flexibility with mix control and signal routing. Each channel has an AUX 5/6 shift button, expanding the number of outputs available. But that's not all. The mixer features a dual-position input/output (I/O) pod that lets you use it as a desktop mixer or convert for rack mounting. The I/O pod rotates out of the way to save space in your rack. The built-in 32/40 bit digital effect processor has 16 awesome programs, main parameter control, foot switch control and tap delay. And if you get any "sub" Sonic noise in your mics just hit the low cut filter to get rid of the P-pops, stage rumble and wind noise. Top it off with a subwoofer output, four true subgroups and global phantom power, and you've got a perfect medium-sized rack-mountable mixer for live events or studio mixing.


    Additional Information
    32/40-bit digital multi-effect processor with 16 programs plus one main parameter control, tap control and foot switch jack

    16 Mic/Line channels with inserts

    3-band EQ with swept mid-range

    75 Hz low-cut filter on each channel

    AUX 1 & 2 with Pre/Post switch

    Six AUX send mixing bus

    Four stereo AUX returns, three with effect to monitor

    Pad on 4 mono channels to handle difficult signals

    Mini Stereo I/O and stereo RCA I/O each with trim control

    +48V phantom power on Mic channels

    Four true subgroups with main L and R routing switches

    8 direct outputs for multi-track recording

    Control Room and Phones outputs with multi-input source matrix

    Mono out with variable low pass filter from 60 Hz to
    160 Hz for subwoofer

    Dual-position I/O pod

    Rec out with trim control for record level matching

    Built-in switching power supply with universal connector, 100-240 VAC, 50/60 Hz

    Phonic WM-SYS4 Stereo Wireless Speaker System
    phonic_WMSYS4
    Larger picture


    SF