QSC

Low Frequency: 12 in. neodymium transducer with 3 in. voice coil
High Frequency: 1.4 in. diaphragm compression driver

Frequency Response (-3 dB)*: 62 Hz - 18 kHz

Frequency Range (-10 dB)*: 53 Hz - 22 kHz

Nominal coverage (-6 dB): 75 degrees conical

Maximum SPL (1 meter): 131 dB peak

Power Output: 400W LF Class H, 100W HF Class AB+B

Input Impedance: 22k balanced, 11k unbalanced

Controls: Gain, Low-cut filter (Main / Monitor), Front LED On/Off, Power, Circuit breaker

Indicators: Power, Signal, Limit

Cooling: Convection

Amplifier Protection: Thermal and output power limiting, output short circuit, overtemperature muting, driver DC protection

Current Consumption at 120 VAC (1/8 power EIA noise): 1.5A

Enclosure: Painted Birch plywood

Finish: Black textured paint

Grille: Powder coated 16 gauge steel

Suspension/Attachment Points: 9 M10 rigging locations

Connectors:
Balanced female XLR line level input
Balanced male XLR full range line level out

Dimensions: 26.9 in. H x 14.7 in. W x 14.9 in. D (683 mm x 373 mm x 379 mm)

Net Weight: 60 lbs

15 in. cone transducer with 3 in. voice coil

Frequency Response (-3 dB) 1: 51 Hz - 105 Hz

Frequency Range (-10 dB) 1: 43 Hz - 145 Hz

Maximum SPL (1 meter): 133 dB peak

Power Output: 700W Class H

Input Impedance: 22k balanced, 11k unbalanced

Controls: Gain, Front LED On/Off, Power, Circuit breaker, Phase

Indicators: Power, Signal, Limit

Cooling: Convection

Amplifier Protection: Thermal and Output Limiting, Output Short Circuit, Overtemperature Muting, Driver DC Protection

Current consumption at 120 VAC: (1/8 power EIA noise) 2.2A

Enclosure: Painted Birch plywood

Finish: Black textured paint

Grille: Powder coated 16-gauge steel

Connectors:
Balanced female XLR line level inputs x 2 (L+R)
Balanced male XLR full range line level throughputs x 2 (L+R)
Male XLR low-cut line level outputs x 2 (L+R)

Dimensions: 25 in. H x 22 in. W x 20.75 in. D (635mm x 559mm x 525mm)

Net Weight: 98 lbs